Working Area – Stainless Steel IS 304 Grade Satin Finish
| Product | Bio safety Cabinet – Class II Type B1 |
| Air balancing | 30% recirculation, 70% exhaust |
| Protection | Product & Personnel & Environmental protection |
| Bio safety Level | Bio safety Level 1 , 2 & 3 |
| Exhaust Duct Requirement | Hard Duct Only |
| Control Plenum surrounded by | Negative Plenum |
| Cleanliness level | ISO class 5 as per ISO 14644-1 |
| Average Airflow | Inflow Velocity – Minimum 0.45 m/s ( 90 FPM) at 8” front opening |
| Velocity | Down Velocity – 0.30 m/s ( 65 FPM) |
| Noise level | 60 db on A scale |
| Light Intensity | Minimum 900 lux inside the working area at ambient zero. |
| MOC Main Body – | Galvanized Iron with PU coated / Stainless Steel – Satin Finish |
| Working Area – | Stainless Steel IS 304 Grade Satin Finish |
| Supply Filter | HEPA Filter having EU 13 rating with suitable size. |
| Efficiency | 99.99% down to 0.3 Microns. |
| Exhaust Filter | HEPA Filter having EU 13 rating with suitable size. |
| Efficiency | 99.99% down to 0.3 Microns. |
| Pre Filter | “Pureair” make, EU 4 rating with suitable size |
| Efficiency | 90% down to 10 Microns. |
| Noise Level | Less than 70 db ‘A’. |
| Vibration Level Instrumentation | Minimum. |
| Differential Pressure Gauge | Magnehelic Gauge – 01 No. (make : Dwyer, USA) with each unit (To measure differential pressure across the supply HEPA filter). Motor Blower Assembly Statically & Dynamically balanced with suitable rating and size. |
| Supply & Exhaust | (Induction motor with centrifugal blower) A Mounting unique spring suspension system to take care of vibration and noise. |
| 3 Pins Switch & Socket | 15 AMPS – 1 set in each unit. |
| Other Switches | On/Off switches for motor blower & CFL lights. |
| Microprocessor Control | Airflow display and UV Interlocking and Low airflow Alarm and Supply & Exhaust filter Fail |
